💎Features
- Difficulty: ⭐️(Medium)
- Perfect For: Beginners
- Skills Needed: Stamping; Foil Transfer
📖 Step-by-Step：
- Apply a layer of the base coat, cure it thoroughly.
- Apply a layer of white base and cure it.
- Apply a thin coat of foil gel, making sure every edge is fully cured (60 seconds in the desktop UV lamp, then 20 seconds around the sides with a handheld light).
- Cut the foil to size, lay it over the nail, and press down well.
- Peel the film and add a coat of builder gel to seal the sticker, cure it thoroughly.
- Apply stamping gel to fill the engraved pattern on the stamping plate. Use a scraper to remove excess gel from the surface, leaving gel only in the grooves. Then, roll the stamper over the design at a consistent speed to lift the pattern.
- Press the stamper straight down onto the nail to transfer the design, then cure it under the lamp.
- Apply a thin layer of top coat, and cure it — done.
